Acquista LF250A// M39466 da Hbm in Italia

1-PW16AC3/100KG-1

unico punto

1-SCOUT55

Measuring Amplifier 4.8 kHz carrier−frequency amplifier for S.G. half and full bridges, inductive half and full bridges, LVDT, piezoresistive and potentiometric transducers Analog output (current / voltage) Four limit value switches Peak value stores (Min, Max, Peak-to-Peak) and envelope function, instantaneous values Serial interface for measurement output and for full Parameterisation

1-SP4MC3MR/30KG-1

cella di carico della piattaforma

1-SP4MC3MR/75KG-1

Cella di carico a piattaforma

1-SUBHD15-MALE

Stecker Bausatz

1-T4WA-S3/10NM

HBM Schraubmesswelle, coppia nominale 10 Nm con sistema di misurazione estensimetrica, classe di precisione 0,1 incorporato encoder rotativo connessioni strumento standard 10 F / G 10 secondo DIN 3121 con 2 cavi di collegamento montati fissi separatamente per coppia u. angolo di rotazione 3 m di lunghezza, con estremità libere

1-T5/20NM

Torque TransducerMeasurement of torques in any direction of rotationNominal torque 20 N.mCylindrical shaft-stubs for no-play friction jointsSmall and handyAccuracy class 0.1Nominal sensitivity 2 mV/VOutput resistance 350 ± 1.5 ΩNominal range of the excitation voltage 0.5…12 VService temperature range -10…+60 °CMaximum permissible speed 4000 rpmProtection class according to EN60529 IP 50

1-TB1A/100NM

Sensore di coppia di riferimento

1-TB1A/5KNM

Reference Torque Measuring Discs Nominal torque 5 kN.m Little space required due to low profile Extremely insensitive to lateral and axial forces and to bending moments Strain gage measuring system, 0.05 accuracy class, torque introduction via flanges, torque output signal 1.5 mV/V permanently mounted 6-core connection cable, 3 m with free ends

1-WA/100MM-T

trasduttore di spostamento

1-WS/ZB 12 ALTERNATIF

Mitutoyo Mark Magnetblock HBM non può essere prodotta

1-X60-NP

1-Z6FC3/50KG-1

BELLOWS TYPE LODCELL

3-3312.0182

SUB-D-Stecker 15-polig mit Haube und Befestigungsmaterial

C2/50KN

trasduttore di forza di compressione

D-15D/MONT

D-MONT

connettore

DQ809

8 canali USB amplificatore measurement espressoDAQFamilie

D-TEDS/MONT-DB

compresi programmare il contenuto della memoria del modulo TEDS TEDS Aufnehmersteck è montato.

HLC-40KN

Type HLM-20242 Output 1.8 millivolts load cell

HLCB1C3 1,1

Emax:2,2t,Emin:0 kg,Elim:3,3t Vmin:220g,Cn;1,94mv/v;TC2163

HLCB1C3/4.4T

Cella di carico

K-CAL-F-D-7-B-S-S

(Kalibrierung der Messgröße Kraft gemäß HBM-Standard (ohne Steckermontage). Rückführbarkeit durch DAkkS-Akkreditierung nach ISO 17025 garantiert bzw. bei Werkskalibrierungen (WKS) im Bezug auf ISO 10012 Kalibrierzertifikat in Deutsch und Englisch Kalibrierart Kraft DAkkS ISO 376, 8 Stufen Kalibrierbereich Kraft <= 1MN Belastungsart Kraft Zug- und Druckrichtung Anzahl Messbruecken Kraft Einfachbrücke TEDS-Programmierung ohne TEDS-Programmierung)

K-CAL-T-W-1-B-S-S-2-0

Working standard calibration for torque acc. to ISO 10012, Calibration range up to 20 N.m Type of Load: clockwise and anti-clockwise torque Number of calibrated signal outputs: 1 signal output (mV/V), 6 Calibration steps

K-CAL-T-W-5-B-S-S-2-0

Working standard calibration for torque acc. to ISO 10012, Calibration range up to 5 kN.m Type of Load: clockwise and anti-clockwise torque Number of calibrated signal outputs: 1 signal output (mV/V), 6 Calibration steps

K-LY41-1,5/350

K-LY41-6/350

K-LY43-3/120-3-7.5M

La tecnologia özllkler ksmnda blgi era

K-P3-MB-200B-Y  

Pressione assoluta Sistema di misura: estensimetri 350 Ohm

K-RTN-S-C3-150-N-12-N-N-S-S

LOAD CELL